Marshall Test design methods are used to design TLA modified asphalt mixture and base asphalt mixture respectively, and their pavement performance is tested. The results showed that there is a transforming coefficient of 1.15 between OAC of 40% TLA modified asphalt mixture and that of base asphalt mixture, and ultimate gradation of the TLA modified asphalt mixture is finer than previous gradati...

The objective of this study is to evaluate the rheological properties and chemical bonding of nano-modified asphalt binders blended with nanosilica. In this study, the nanosilica was added to the control asphalt at contents of 4% and 6% based on the weight of asphalt binders. Superpave binder and mixture tests were utilized in this study to estimate the characteristics of the nano-modifed aspha...

This study presents a finite element (FE) micromechanical modelling approach for the simulation of linear and damage-coupled viscoelastic behaviour of asphalt mixture. Asphalt mixture is a composite material of graded aggregates bound with mastic (asphalt and fine aggregates). The microstructural model of asphalt mixture incorporates an equivalent lattice network structure whereby intergranular...

This study presents micromechanical finite-element FE and discrete-element DE models for the prediction of viscoelastic creep stiffness of asphalt mixture. Asphalt mixture is composed of graded aggregates bound with mastic asphalt mixed with fines and fine aggregates and air voids. The two-dimensional 2D microstructure of asphalt mixture was obtained by optically scanning the smoothly sawn surf...

rutting of hot mix asphalt pavements due to increased number of heavy vehicles, especially in tropical regions, causes several performance problems. large stone asphalt mixtures have more stiffness and shear resistance and so more rutting resistance compared to conventional mixtures. hence, using these mixtures in thick layers of hot mix asphalt pavements at tropical regions could be an appropr...

Previous research has shown that composite shape-stabilized phase change material (CPCM) has a remarkable capacity for thermal storage and stabilization, and it can be directly applied to highway construction without leakage. However, recent studies on temperature changing behaviors of CPCM and asphalt mixture cannot intuitively reflect the thermoregulation mechanism and efficiency of CPCM on a...

Basic oxygen furnace slag (BOF) is widely used in road construction, but there is a lack of characteristics in different asphalt mixtures. This study investigates the properties of hot-mixed asphalt (HMA), containing stone mastic asphalt (SMA), porous asphalt (PA), and dense-graded BOF as a partial substitution for natural aggregates. The purpose of this study is to evaluate various BOF slag co...

The basic oxygen furnace slag (BOF) was wide used in road construction, but there was a lack of characteristics in different asphalt mixtures. This study investigates the properties of hot-mixed asphalt (HMA) containing stone mastic asphalt (SMA), porous asphalt (PA) and dense-graded BOF as a partial substitution for natural aggregates. The purpose of this study is to evaluate various BOF slag ...

Compaction characteristic of the surface layer asphalt mixture (13-type gradation mixture) was studied using Superpave gyratory compactor (SGC) simulative compaction tests. Based on analysis of densification curve of gyratory compaction, influence rules of the contents of mineral aggregates of all sizes and asphalt on compaction characteristic of asphalt mixtures were obtained. SGC Tests show t...

With the strengthened regulation on the mandatory use of recycled aggregate, development of construction materials using recycled aggregate has recently increased. This study aimed to secure the performance of asphalt concrete mixture by developing recycled-modified asphalt using recycled basalt aggregate from the Jeju area. The strength of the basalt aggregate from the Jeju area used in this s...